| |
 I just saw the April/May 2011 issue come off the press and I'm stoked!
The April/May issue is a themed issue focussing on 'Working in a Small Shop'. It is the brain child of our editor Rob Brown who has wanted to cover this topic since the day he came on board.
As a fine woodworker, Rob has worked in, and visited a lot of shops - and has often been impressed with the amazing work that can come out a small workshop. More recently, as an editor, Rob has been meeting and corresponding with woodworkers across Canada many of whom are working with space constraints. Rob has drawn from these experiences and has put together a great issue that addresses small shop problems and solutions.
If you have ever been frustrated with your lack of space, or if you have ever struggled with how to make the most out of the space that you have, then the April/May'11 issue is definitely for you.
The 'small shops' issue will be mailed out to subscribers March 14 and will be available shortly after that at Home Hardware Building Centres, Lee Valley, and Busy Bee. Subscribers are set to receive theirs a bit earlier than that.
Enjoy!
Paul
10,000 MEMBERS HAVE JOINED CANADIAN WOODWORKING FORUM
CanadianWoodworking.com's Growing Forum Membership Now Exceeds 10,000!
 Thanks to Bill MacDonald (Forum Administrator) and his team of assistants - Phil McCurdy, Mike Guilbault, Ryan Wettlaufer, Lisa Chemerika, Kerry Cox, Mathew Kinzel, and Ryan Shervill - the Canadian Woodworking Forum has reached record-breaking numbers of active members - making it by far the largest woodworking forum in Canada!
When Bill took on the position of Forum Administrator, there was only a few thousand members, on a single forum entitled 'Woodworking' in which all kinds of varied questions and posts were grouped.
Now, just a few years later, Bill and his assistant administrators have grown the membership to over 10,000 (10,257 at the time of this entry) and have expanded the single woodworking forum to 13 distinct categories, including: Turning, Finishing/Refinishing, Home Improvement, Power Tools, Hand Tools, Shop Related Discussions, and Tutorials. They have even set up a special section for those 'New to Woodworking'.
Bill and his team are doing a fantastic job at listening to and responding to the needs of Canadian woodworkers. They have built a virtual community in which woodworkers across the country can connect, share, and learn more about Woodworking and Home Improvement.
If you are not already a member of the woodworking forum, please drop by and join in. It's a very welcoming group of woodworkers who enjoy the company and experience of others involved in this craft.
Check it out, and join our community of woodworkers: Canadian Woodworking Forum
TREND RELEASES NEW VIDEO: JAMES BARRYs GUIDE TO DIAMOND SHARPENING
 Trend Routing Technology has introduced a new instructional DVD entitled, “James Barry’s Guide to Diamond Sharpening.”
James Barry has more than 25 years experience in the diamond sharpening market and he has worked with a wide range of tooling manufacturers from all over the world. He is highly regarded as one of the foremost experts in diamond sharpening and he is known around the globe for his lively and informative demonstrations.
James Barry stated, “There are many types of diamond and there is a wide variation in price points in the diamond sharpening market. The market is cluttered and quite frankly I believe that the consumer is confused by the array of product and claims by manufacturers. We found it necessary to educate the consumer on the different diamond sharpening tools and the proper techniques that the user should employ during the sharpening process.”
Barry continued, “It is not difficult to sharpen with the right equipment. This DVD shows (from a hobbyist to a professional) how anyone can affordably sharpen easily in seconds. It is not a rocket science and it is actually very easy to sharpen when utilizing quality diamond stones and files”
The DVD is broken down into seven segments. It begins with a lively introduction into diamond sharpening. It is followed by the proper utilization of a double side credit card stone, the use of a taper file in the workshop and garden, the proper utilization of a kitchen steel and it ends with pen file and outdoorsman file techniques. There is also a chapter on Bench stones and the complete Trend range which also shows chisel / plane blade sharpening and the new trend honing guide.
Barry also stated, “Trend will be introducing new unique and innovative sharpening stones and files in the coming months and I look forward to returning to North America this year to participate in some of the shows and exhibitions.”
The James Barry’s Guide to diamond sharpening DVD will retail for $ 12.90 USD and the product code is U*DVD/DWS/JB.
Here is a direct link to the video, VIDEO LINK .
For further information on Trend products please visit www. Trend-usa.com
FORD MACHINERY OFFERS ON-LINE CATALOG OF 'MACHINES WITH EXPERIENCE'
 Ford Machinery started in 1936 by Jack Dubiner (in the heart of Toronto’s machinery district at King and Jarvis), and is still family-owned and operated - spanning four generations!
Rob Dubiner, the current owner/operator offers a vast and varied inventory of new, used and rebuilt machinery for all your needs. Everything from woodworking machinery, metalworking machinery and tinsmithing machinery, to power tools, electric motors and accessories.
A dependable source of experience and expertise, Rob operates out of two warehouses. With complete rebuilding facilities he services everything he sells.  Expert service is available for all machinery, in your shop or theirs. No matter what the demand, Ford Machinery Supply has what you need to do the job right.
Visit Ford Machinery at their sales and service center in Richmond Hill, or browse through their extensive online catalogue
.
ROSEWOOD STUDIO OFFERS 12 WEEK INTENSIVE, HANDS-ON PROGRAM
 This program is designed for the serious woodworker, whether they are considering a career in furniture making, or wish to pursue the craft for personal satisfaction and development.
Intensive and hands-on, this course will take you from a thorough grounding in the basics of furniture making and design through to advanced techniques and business practices.
Because each student arrives at Rosewood with a unique skill set, we encourage the improvement of existing skills, while ensuring that challenges are paced appropriately for each individual. During final projects, periodic discussions and reviews of progress at each bench benefit the entire class, exposing students to the challenges presented in the  construction of a variety of projects.
Upon completion of the 12-Week Craftsman Program, students will have gained solid experience and understanding of a wide range of fine furniture making techniques, as well as an introduction to the design of finely made contemporary furniture and a realistic view of the challenges of working professionally.
Here is more info on Rosewood's 12 Week Craftsman Course: COURSE INFO
Other courses of interest include:
6 Week Craftsman Course
Excellence with Hand Tools
Mastering Machinery
Make Your Own Hand Tools
Joinery for Furniture Makers
 
.
ANNUAL WOODCARVER SHOW AND COMPETITION
 Name:
Niagara Woodcarvers 32nd Annual Show and Competition
Dates:
March 26 - March 27, 2011
Location:
Optimist Recreation Centre
4751 Dorchester Road at Morrison
Niagara Falls, Ontario, Canada L2E 6S8
Hours:
Saturday 10:00 am to 5:00 pm
Sunday 11:00 am to 5:00 pm
Admission:
$ 3.00, free for children 12 and under
Website:
www.niagarawoodcarvers.ca
LIE-NIELSEN HAND TOOL EVENT
 This is a wonderful opportunity to try out Lie-Nielsens’s extensive line of hand tools and learn how great tools make your woodworking easier!
Their skilled staff will conduct demonstrations to help demystify the world of hand tools and answer your questions. We will cover topics like sharpening, tool use and care, and joinery techniques. A selection of Lie-Nielsen tools are available for purchase at each Event.
Lie-Nielsen Hand Tool Events began in 2007 as part of their effort to promote education in woodworking, demonstrate a variety of woodworking tools and techniques, and encourage hands-on skills building.
For details on upcoming Canadian shows, please visit their website at www.lie-nielsen.com or call: 1-800-327-2520.
Upcoming Canadian shows include: Saskatoon, Edmonton, Vancouver, Victoria, Calgary, Toronto, and Montreal .
ABOUT LIE-NIELSEN HAND TOOL EVENTS
Lie-Nielsen Hand Tool Events are FREE, open to the public, and do not require registration. Started in 2007 to promote education in woodworking, we collaborate with guilds, schools, and businesses across North America.
Hand Tool Events are hands-on: attendees are encouraged to try out Lie-Nielsen tools and bring your tough questions! Their skilled event staff demonstrate sharpening, tool use and care, and hand tool techniques. Event staff can help you learn to use the tools effectively and make tool choices that will best suit your work.
A selection of Lie-Nielsen hand tools is available for purchase at every Event. Attendees are eligible for free shipping on orders placed at the Event or up to one month after (excluding Workbenches).
Guest Demonstrators often include expert craftspeople, toolmakers, and woodworking organizations who share our passion for excellence. They demonstrate, answer questions, and, aim to encourage your best work. Events are also a great opportunity to check out the organization hosting the Event.
ROCKLER INTRODUCES DUST RIGHT VORTEX
 Convert a Standard Shop Vacuum into a 2-Stage Dust Extractor
Rockler Woodworking and Hardware has introduced the Dust Right Vortex, a 10-gallon dust container that turns any standard shop vacuum into an effective two-stage dust extractor. When used with most power tools and shop vacuums, the Dust Right Vortex™ captures sawdust, wood chips, and other shop debris before it gets to the vacuum, effectively preventing the loss of suction power caused by a clogged vacuum filter. Dan Wenning, product development specialist at Rockler, says, "Shop tools such as routers, planers, and table saws create a huge amount of debris that needs to be removed in order to maintain a clean and safe shop. 
Unfortunately, most of that debris will reach the vacuum filter, clogging it and quickly robbing it of suction. The Dust Right Vortex uses a patented process that intercepts that debris, collecting a vast majority of it in the 10-gallon container before it can clog a filter."
The Dust Right Vortex has other conveniences not found in competitive products, such as:
• Its 10-gallon capacity is twice the size of other available dust collection containers
• The 5-caster base makes it easy to maneuver throughout a shop, and provides exceptional stability
• Translucent container has an easy-to-read "fill" line
• The snap-on lid is easy to remove, making disposal fast and easy
• Hoses fit tightly inside the connection ports to prevent unwanted disconnection
• Includes a 36" flexform hose that connects the Dust Right™ Vortex to any shop vacuum
The Dust Right™ Vacuum (SKU: 40530) retails for $ 69.99 and is available at Rockler Woodworking, Rockler's independent resellers, Rockler.com, or in the Rockler catalog.
For store locations or a free catalog, please visit www.rockler.com
or call 1-877-ROCKLER.
STANLEY and DEWALT PARTNER WITH HGTV HOST JIM CARUK
Stanley and DEWALT Partner With Jim Caruk, Master Contractor, HGTV Host, Founder of Build It Yourself Learning Centers and Renos for Heroes Foundation.
 Jim Caruk signs category-exclusive endorsement agreement with Stanley Hand Tools and DEWALT Power Tools.
Stanley Black & Decker, Inc is proud to announce that it has entered into a three-year endorsement with Jim Caruk, Master Contractor and HGTV host best known for his hit series, Real Renos. The agreement between Stanley Black & Decker, Inc. and Jim Caruk involves category exclusive endorsement of DEWALT Power Tools and accessories and Stanley Hand Tools branded Stanley, Stanley FatMax, FatMax Xtreme, and Stanley BOSTITCH.
“It’s great to be associated with those two famous names – Stanley and DEWALT. I look forward to working with the company, and with its premium quality hand and power tools,” says Caruk. “In this business, it’s important that you use first-rate materials and durable, high-performance tools that allow you to complete the job efficiently and expertly. There’s nowhere to hide in this business. Your finished projects tell everyone how well you did.”
In addition to his participation in integrated media campaigns, editorial, and  promotions for the brands, Jim will take part in trade and customer-related events.
About Jim Caruk
Ten years ago, Jim Caruk was a pioneer in filming the business of construction for television, and today he is in production on another groundbreaking renovation show that will début soon. But Jim is much more than a TV personality; he’s a working contractor, having started his career over 30 years ago as an apprentice to an accredited tradesman. When Jim is not in front of the cameras, he is on the jobsite directing some of the most prestigious renovation projects in Canada.
Jim is recognized in the industry for being a strong advocate of tradesmen and homeowners alike. This spring, Jim will launch his bi-monthly publication, Renovation Contractor, a national trade magazine for professional homebuilders and renovators.
Jim also recently founded the Toronto-based Build it Yourself Learning Centers (www.biyworkshops.com ) which, through his network of accredited instructors and industry professionals, provides an interactive, practical learning forum. Build it Yourself Learning Centers teach homeowners all the essential know-how they need to successfully complete building projects by themselves.
In 2009, Jim founded Renos for Heroes (www.renosforheroes.org ), a non-profit foundation that does home modifications for wounded Canadian military personnel.
NEW GENERAL INTERNATIONAL PEN TURNING MINI-LATHE
 Designed and built specifically for turning pens and other small hobby type projects the new #25-010 from General International offers 3 speeds (1350, 2250 and 3500 RPM) using a simple belt and pulley system.
Equipped with a quiet, smooth running 1/5 HP 110V 1.2 amp motor and featuring an extruded aluminum frame, head and tailstock the 25-010M1 has a 4” swing over bed, 2 ½” swing over tool rest and a maximum distance between points of 12”.
Both the tool rest and tailstock are equipped with smooth action quick lock ratchet levers for smooth, easy repositioning and positive locking action.
The headstock spindle thread is 3/4” x 16 T.P.I. with a 3/8” through hole, to accommodate a large variety of standard after-market accessories, and both the head and tailstock are fitted with a very common MT#1 Morse taper.
Factory supplied with a 6” tool rest, 2 1/2” face plate, live center, spur center, knock-out bar, a see through lathe guard and a pen turning mandrel set, the General International 25-010M1 Pen turning mini-lathe is currently retailing for $ 229.99 CDN (pricing valid until at least August 31st, 2011) and can be ordered from most General/General International retail distributors.
A complete list of distributors can be found here: www.general.ca
More info on this lathe here: http://www.general.ca/site_general/g_produits/lathe/25-010.html
NEW SIGNATURE LINE CHOP MASTER BLADE
 Forrest’s New Signature Line Chop Master Blade
Designed for Kapex Sliding Compound Miter Saw
Serious woodworkers find this high-performance 260mm diameter, 30mm bore blade to be ideal for use on their KS 120 units.
Forrest Manufacturing has added a new blade to its Signature Line of Chop Master Blades. This blade is designed for use with the lightweight, compact Kapex KS 120 sliding compound miter saw from Festool.
In discussing this latest addition to Forrest’s Signature Line of Chop Master Blades, the company’s vice president, Jay Forrest, said, “We knew that many serious woodworkers wanted an ultra-reliable, top-quality Forrest blade they could use on their premium KS 120 saws. So that’s what we’ve provided. Our new blade—with its 260mm (10.2362”) diameter and 30mm (1.1811”) bore—fills this specific niche. Prior to this, craftsmen who desired a Forrest blade for their Kapex saw had to place a custom order. Now that this latest Signature Line Chop Master has been added to our product line, demand has been very good and customer reaction extremely favorable. The catalog number for the blade is CM26905105 (Kapex), and the list price is $ 187.”
Forrest blades are available direct from the factory, from quality dealers and retailers, and also from catalogs.
For more information, call 1-800-733-7111 or visit www.ForrestBlades.com
3Ms NEW SCOTCHBLUE PAINTERS TAPES
 New Edge-Lock Paint Line Protector ensures sharp paint lines and clean removal without surface damage
3M's Edge-Lock Paint Line Protector incorporates an innovative, advanced technology for the ScotchBlue family of painter’s tapes that helps keep the paint out to produce super sharp paint lines. Edge-Lock Paint Line Protector is a 3M proprietary, patent-pending treatment designed to help improve paint lines by using the properties of paint to avoid seepage and make clean, crisp lines.
Edge-Lock Paint Line Protector is not like other paint blocking technologies. The new, enhanced 3M proprietary treatment creates a barrier to keep paint out and help create super sharp paint lines, the hallmark of a professional paint job. It leaves no chemical residue, no paint ridges and there is no need for a storage container to protect the tape.
Edge-Lock Paint Line Protector will enhance both ScotchBlue Painter’s Tape for Delicate Surface and Multi-Surface, giving home improvement enthusiasts an ideal solution for every surface and paint project.
The products now featuring Edge-Lock Treatment include:
Advanced Delicate Surface with Edge-Lock Paint Line Protector
• Safe on freshly painted surfaces (24 hours old)
• Walls, trim, hardwood floors and glass
• Low VOC paints
• UV resistant for 60-day clean removal
• Medium-low adhesion
• Edge-Lock Paint Line Protector helps keep paint out for super sharp lines
Advanced Multi-Surface with Edge-Lock Paint Line Protector
• Walls, trim, hardware and glass
• UV resistant for 14-day clean removal time
• Medium adhesion
• Edge-Lock Paint Line Protector helps keep paint out for super sharp lines
The new ScotchBlue Painter’s Tapes with Edge-Lock Paint Line Protector will be available at home centers with a suggested retail price of $ 4.99-$ 14.97.
For more information on ScotchBlue Painter’s Tapes, please visit www.ScotchBlue.com
FORUM MEMBER MAKES WOODEN SHIRTS, AND HEADLINES
 A student, at the school where Dave Danchuk's children go, initiated a big event for Pink Shirt Day, an anti-bullying event.
To support the event, Dave cut out 360 wooden t-shirts (one for each student), which students hung on the school yard fence after the students painted them.
The event was picked up by the NOW Newspaper (Dave's local paper) who interviewed Dave.
NOW ran the story on their front page.
 Soon after, it was picked up by at least a dozen newspapers including the Vancouver Sun and the National Post as well as others both in Canada and the U.S.
Great job Dave!
.
|
 |
|
The companies below have sponsored this free eNewsletter. To visit a sponsors web site, click on their logo.
Interested in advertising?
|
|
