| |
 I have just returned from Moncton NB, after attending the last wood show of my annual circuit.
I wasn't able to attend as many wood shows this year as in previous years, but of those that I was able to attend, I thoroughly enjoyed (and appreciated) all of the visits that I got in with both magazine and eNewsletter subscribers.
In those visits, I received a lot of appreciative comments on the changes that we have made to the magazine. As well, there were a lot of great suggestions on what readers want to see in upcoming issues.
To summarize, readers are enjoying the 'Home Improvement' aspect of the magazine, and really like that those projects are 'woodworking based'. There was also a lot of interest in our new 'FinerDetails' section of the magazine, which highlights a specific technique which can be incorporated into various woodworking projects. The FinerDetails article is the brain child of Rob, and he's got some awesome installments coming up for you in future issues.
There were also a number of people who dropped by just to say how much they look forward to (and laugh out loud at) our 'WoodChuckle' article. Several of those who stopped by to comment on Don's work even admitted to seeing a bit of themselves in his work. It seems that there is a bit of Don in all of us.
As for comments on this eNewsletter, I heard from quite a few subscribers that they like how timely our coverage of new tools is. Many commented that they read about new tool announcements in our eNewsletter months before they see it anywhere else.
So, without further adieu, read on to find out what's new in the woodworking industry.
Enjoy!
Paul
Craftex Announces New Line: The CX-Series
To meet the growing demands of serious woodworkers, Craftex is proud to announce the introduction of a new line of heavy duty machines - Craftex CX-Series.
The CX-Series of machines features only heavy duty machines with improved specifications & features deemed necessary by growing market trends. With the introduction of several new machines (over 20) over the next several months, the machinery industry just got more interesting!
Key features to the new line:
All machines will be backed by a full 3 warranty
All machines feature improved motors, features & specifications
All machines feature a sharp new look All machines feature a special powder coated paint that has better resistance to oil & grease
All machines are made in ISO 9001 factories
CX205 Cabinet Table Saw
 This new heavy duty left tilt Cabinet Table Saw features a 3HP motor, a large precision ground cast iron table, cast iron trunnion and a precision cam lever fence for all day ripping. Equipped with a quick release riving knife, new CSA approved safety push stick, and a magnetic switch adding safety & precision to your shop. The fully enclosed base has a 4” dust port for quick clean up and like all CX-Series machines, this unit features powder coated paint, sharp looking two tone colours and a full 3 year warranty.
CX206 Cabinet Table Saw
This new heavy duty left tilt Cabinet Table Saw features a 3HP motor, cast iron trunnion, a large precision ground cast iron table and a precision cam lever fence for all day ripping. Similar to the CX205, this unit is equipped with a quick release riving knife, new CSA approved safety push stick, and a magnetic switch adding safety & precision to your shop. The fully enclosed base has a 4” dust port for quick clean up and like all CX-Series machines, this unit features powder coated paint, sharp looking two tone colours and a full 3 year warranty.
 CX400 Dust Collector
The new Dust Collector is the perfect machine for just about any shop, large or small.
From the same factory as our popular CT030, this machine features a canister filter and steel arm joining the canister & impeller for improved performance and efficiency. Our canister filters have gained immense popularity over the past several years, as they filter 6 times the area versus standard bags and are made of a spun bond polyester that filter particles down to 1 micron.
This machine features a new radial fin style impeller made from balanced steel measuring in at 12 3/4”. Also, like all CX-Series machines, this unit features powder coated paint, sharp looking two tone colours and a full 3 year warranty.
More info:
www.BusyBeeTools.com
1-800-461-BUSY
Big Bear Tool Unveils New Website
 Big Bear Tools began with
the intention of bringing the highest-quality edge tools and edge tool related
products to the North American tradesperson. More than 10 years later, Big Bear
Tools has seen a strong following develop and an extensive dealer network to go
with it. With great plans for the future Big Bear Tools steps into its second
decade more hotly in pursuit of the highest quality edge tools available today.
To that end, Big Bear
Tools has just unveiled it’s new website, and welcomes you to drop in to check
out available products (including Silky Saws, and Tormek Sharpening Systems), and peruse it’s ever
expanding dealer network. With over 175 dealers across Canada, there is sure to
be a dealer near you.
More info:
1-877-454-8665
www.BigBearTools.com
Now Available From General International: New 14 inch Wood Cutting Bandsaw.
Featuring a heavy duty 2-piece cast-iron frame and dynamically balanced 14” wheels with replaceable rubber tires, the new 90-140M1 offers a standard 6” depth of cut that can be expanded to 12” with an optional riser block attachment kit #90-130A.
 Mounted to an easy to assemble enclosed steel stand, the 90-140 weighs 191 lbs and is equipped with a high quality 120V 1 HP 10 amp motor. A simple belt and pulley system allows for easy selection between either 1630 or 2730 FPM blade speeds for excellent results in either hard or soft woods.
The 90-140M1 has a 16” x 16” full cast iron table that tilts 10° left and 45° right, upper and lower combination ball bearing and carbon block blade guides, a rack and pinion controlled telescoping upper guide and guard system and an easily accessible blade tension knob for fast blade changes or adjustments.
The unit is also equipped with a safety lock-out switch with removable key to prevent unauthorized use, a precision aluminum miter gauge and a built-in blade cleaning brush to keep the blade free of dust and wood chips. An optional Excalibur deluxe band saw rip fence system #90-075A is also available – retail $ 134.95 CDN.
The 90-140M1 is currently advertised for $ 659 CDN, valid until at least Feb, 28th 2011, and can be ordered from most General/General International retail distributors – a complete list of distributors can be found on the General website.
For more info:
www.general.ca/site_general/g_produits/bandsaw/90-140.html
1-888-949-1161
A First in Quebec City: A Consumer Show for the Woodworking Hobbyist and DIYer
The “Salon National du Bricolage”, a first in Québec, is the ideal showcase where DIYers and various craftsmen will find equipment, all the latest hand and technological tools as well as materials and other solutions necessary for the realization of big and small home projects alike.
 The “Salon National du bricolage” also presents a wide variety of products and services useful in using various materials and energy resources in a secure and ecological manner in the prospect of sustainable development. The exhibitors will show their wares to those just starting off as well as to experienced do-it-yourselfers who will be able to confirm their knowledge with colleagues, suppliers and teachers.
Be it for the simple pastime or for a more important home projects, the “Salon National du bricolage” will surely answer questions, give demonstrations, guide and furnish expertise guaranteeing success of home projects.
During this three day consumer show, the public will be able to take notice of the latest technologies, methods and tricks of the trade to realize personal home projects and give them a professional finish.
For more information:
www.jobricole.com
(819) 752 9492
New Excalibur 16 inch Tilting Head Variable Speed Scroll Saw
The new EX-16 Excalibur scroll saw includes all of the key features that scrollers have come to expect from the Excalibur brand.
 This new 16” throat capacity saw offers the same unique titling head design as the larger EX-21 and EX-30 models. The 45° left or right tilting head tilts the blade, not the table, keeping the workpiece level and allowing for better control, more accurate cuts, as well as consistent, comfortable hand positioning at all times, regardless of the angle of cut.
The EX-16 has a large 12” x 18 1/2” table made from 3/8-inch thick plate steel with a smooth-glide friction-free coating and offers a maximum cutting depth of 2”.
Weighing in at a robust 68 lbs the ¼-inch thick, laser-cut steel plate chassis is built for maximum stability and minimal vibration. The saw is equipped with a high-quality 120V 1.3 Amp motor, for ample cutting power. A front mounted electronic variable speed control knob allows for blade speed adjustment from 400 to 1550 strokes per minute, allowing the user to dial-in the correct speed to suit the material, blade and type of cut, for maximum efficiency.
Like all Excalibur scroll saws, the EX-16 is equipped with an onboard flexible dust blower, an adjustable workpiece hold-down and is designed for quick and easy tool-free blade changes using finger operated blade clamps that accept all 5-inch unpinned type scroll saw blades. The easy access blade tensioning system tensions the blade in two places; with a quick tension lever right above the blade, and a fine-tune adjustment knob that adjusts the height of the upper arm at the top rear of the saw.
A unique upper arm lift feature saves time by making frequent blade location changes for inside cutting applications on complex pieces fast and easy, by holding the arm in the up position so that the bottom end of the blade can be fed down through the workpiece from above.
The Excalibur by General International EX-16 is currently retailing for $ 529.99 (price valid until at least Feb 28th, 2011) and can be ordered from most General/General International retail distributors – a complete list of distributors can be found on the General website.
An optional adjustable height steel stand (#EX-21BS $ 119.00) and 110V 15 amp foot switch (#EX-01 - $ 24.95) are also available.
For more info:
1-888-949-1161
www.general.ca/site_excalibur/e_produits/EX-16e.html
Forrest Manufacturing Introduces a Thin Kerf 48-Tooth Woodworker II Saw Blade
The New Blade Minimizes Resistance When Cutting Rips or Cross Cuts
and is Ideal for Use on Lower-Power Saws.
 Forrest Manufacturing now offers a thin kerf version of its popular 48-tooth (1048)Woodworker II blade. This thin kerf version of their general-purpose blade has been especially designed for lower-power saws, such as those that are 110 volt, .75 to 1.5 HP.”
Vice President Forrest highlighted some of the new blade’s advantages by saying,“The narrower kerf means the blade cuts through less material. The amount of friction and heat produced is reduced, and not as much force is required when feeding the material into the saw. As a result, the thinner kerf helps minimize wastage when working with expensive, high-quality woods.”
Both the thin kerf and standard versions of the 1048 Woodworker II have a conventional 10-inch diameter and a 5/8-inch bore. Although especially suited for manufacturing picture frames or other products that require hundreds of cross-grain cuts, these blades are a wise investment for any woodworker who desires a reliable, fine-quality, all-purpose combination blade. Like all Forrest blades, the Thin Kerf 1048 Woodworker II is precision engineered from corrosion-resistant, super-strong C-4 micrograin carbide. This gives it up to 300 percent longer life between sharpenings than other carbide blades. And, as is the case with other Forrest blades, the Thin Kerf 1048 Woodworker II is hand-straightened to ensure perfect flatness and has exceptional perimeter concentricity and side runout of +/- .001.
To help ensure continued performance, Forrest Manufacturing offers state-of-the-art factory sharpening at a reasonable cost. Customers have the satisfaction of knowing that the Thin Kerf 1048 Woodworker II is made in the United States and comes with Forrest’s highly respected 30-day, money-back guarantee. The model number for the 10-inch blade is WW10487100. The list price is $ 134.00
For additional information:
1-800-733-7111
www.ForrestBlades.com
Stanley FatMax Air Impact Wrench and Mechanics Tools: Professional Performance For Home Mechanics
FatMax Mechanics Tools Deliver Durability and Comfort For Car, Boat or Home
 The Stanley FatMax lineup of air tools and mechanics socket sets have all the power and strength needed to get the job done, whether its home improvement, automotive or boating repairs. Stanley FatMax automotive air tools are designed to make any job easier. Because they’re powered by compressed air rather than batteries or electricity, air tools are lighter than other tools and have fewer moving parts so they have a longer life. Stanley FatMax Mechanics Tool Sets are professional grade quality tools designed for comfort and durability.
The Stanley FatMax Air Impact Wrench is ideal for loosening nuts and bolts, removing lug nuts when changing tires, and heavy-duty repairs on engines, transmissions and suspensions.
Stanley FatMax 1/2 Inch Drive Air Impact Wrench (#70-113)
Twin hammer impact mechanism provides extra durability and maximum  torque of 500 ft/lbs.
Handle exhaust directs exhaust down and away from user
Molded handle absorbs vibration and reduces hand fatigue
Variable speed regulator for optimum control
Touch control trigger for ultimate power and speed control
Additional features include quick release button to make changing sockets faster and easier, thumb control directional control for easy transition from forward to reverse, and MaxDrive socket design to reduce fastener stripping and provide 15% more torque. Ratchets feature a heavy-duty, low-profile design for improved access into hard to reach places and have a tough 60-tooth gear system. Lock-on wrenches prevent slippage and reduce damage to the fastener.
Each set comes in a two-piece case to allow for lid removal enabling the case back to be used a drawer tray and easily reassembled for storage or travel.
The Stanley FatMax Air Impact Wrench and Mechanics Tool Sets are available at Canadian Tire stores across Canada at special retail prices ranging from $ 149.99 to $ 299.99
For more information:
www.stanleyhandtools.ca
New Product Release From Veritas: Carcass Saws
 These saws carry forward the same design principles used to develop Veritas innovative dovetail saws, adopting selected traits of traditional carcass saws and rendering them using innovative materials and modern manufacturing methods.
Typically used to cut joints in drawer runners, dividers, and stretchers (the framework or carcass of a piece), they are well balanced, maneuverable, and scaled for smaller work than a tenon saw.
Available in rip and crosscut versions. The 12 tpi rip saw has a 10° rake angle and an included angle of 60° for efficient cutting parallel to the grain. The 14 tpi crosscut saw has a rake angle of 15°, an included angle of 60°, and teeth filed with alternating 15° bevels so they sever wood fibers rather than tear them.
The teeth on each have relatively minimal set, at only 0.003Й per side. Each saw has a molded spine that incorporates stainless-steel powder for weight, glass fiber for stiffness, and an advanced polymer binder. An over-molded blade and stainless-steel handle-mounting bolt create a solid one-piece blade/spine/mount assembly. A single brass fastener secures the bubinga handle. The open-grip handle, made larger than those of classic carcass saws, permits a comfortable, secure grip. Offered individually or as a pair. Patented.
A. 05T07.05 Rip Carcass Saw, 12 tpi $ 69.00
B. 05T07.01 Crosscut Carcass Saw, 14 tpi $ 69.00
C. 05T07.10 Pr. of Carcass Saws $ 119.00
For more info:
www.leevalleytools.com
Using an oscillating tool just got easier
 Thanks to the new Dremel Multi-Max Universal Adapter™, users of any type of oscillating tool can now utilize the Dremel brand's patented Quick Fit™ oscillating accessories. With faster accessory changes and a first-of-its-kind pin design that keeps accessories in place during use, the Universal Adapter allows oscillating users to spend less time setting up their tool and more time repairing, remodelling and restoring.
The Dremel Multi-Max Universal Adapter allows all Dremel Multi-Max accessories to be used with all of the current oscillating tools on the market including brands from Fein, Rockwell, Bosch, Craftsman, Rigid and Masterforce. No Dremel Multi-Max? No problem.
More info:
www.dremelnewsroom.com/epks/MMUniversalAdapter/index.html
www.dremel.com
|
 |
|
The companies below have sponsored this free eNewsletter. To visit a sponsors web site, click on their logo.
Interested in advertising?
|
|
