If you haven’t already noticed, we have added a new section to our website’s ever-growing Woodworking Forum.

That section is headed up by our editor, Rob Brown, and is entitled: Canadian Woodworking & Home Improvement Magazine. This new section offers you the opportunity to browse the contents of the current issue, see a preview of upcoming issues, post comments and questions to the editor, and make suggestions for future articles.

Although this new addition just went up a week or so ago, we have already received some very informative and insightful suggestions for future issues. Check it out yourself , and perhaps post some of your thoughts on what you’d like to see in upcoming issues.

Enjoy!

Paul

Attend Woodstock Woodshow and Complete Your Collection of Canadian Woodworking Magazines

Got a subscription to Canadian Woodworking, but missing a few back issues? If so, then drop by the magazine’s booth at the Woodstock Woodshow (Oct. 1-3) and pick up any missing issues FREE!

That’s right - as a proud sponsor, and to celebrate the 25^th anniversary of the Woodstock Woodshow, Canadian Woodworking magazine will be helping subscribers to complete their set, from the date of their first issue up to the current issue.

Some issues are already sold out, and others are of limited quantities, so please arrive early to avoid disappointment.

Also, because of crowds there will be no browsing at the show,  so please come prepared by knowing which issues you need.

Busy Bee Holds First Annual Tent Sale in Ottawa.

Participate in live demonstrations from experienced manufacturer representatives, and see pricing on products like you’ve never seen before.

The tent sale will be held at Busy Bee’s 1400 Ages Drive location.

The event will be one day only: Saturday September 18.

Hot dogs and pop will be served free, all day.

For more info, check out Busy Bee’s website at: www.busybeetools.com

General International Announces New Cyclone Dust Collector

Now available from General International, the new model 10-800CF M1 portable 2-stage cyclone dust collector.

Mounted on large, smooth rolling swivel casters and featuring a low profile design with a maximum height of 70 inches, the 10-800CF is suited to a wide variety of small to medium duty professional or serious hobbyist shops where portability is needed or where low ceilings may restrict equipment size.

Sporting all-steel frame construction, the 10-800CF M1 is equipped with a 1.5 HP TEFC 110V 12 amps motor. The 13 inch blower is capable of generating 611 CFM of airflow with a static pressure rating of 10 inches of water. The cyclone separates the larger wood chips from the finer dust particles allowing for less frequent emptying of the dust collection bag. The unit is supplied with a 5 inch main hose inlet fitted with a removable dual 4 inch “Y” fitting, a caster mounted 2-piece steel 30 gallon chip collection drum, an ultra-efficient 1 micron canister filter with a total surface area of 48 square feet, and a heavy-duty transparent plastic collection bag. For added convenience a remote controller allows the user the flexibility to turn the machine on or off from virtually anywhere in the shop.

Currently advertised price (valid until Feb 28th, 2011) is 19.99 (CDN). The 10-800CF M1 and can be ordered from most General/General International retail distributors – a complete list of distributors can be found on their website at http://www.general.ca

Steel City Tool Works Announces Partnership in Canada

Seeking to better service dealers and woodworkers in Eastern Canada, Steel City Tool Works LLC, announced a strategic distribution alliance with Nordis Distribution. Beginning October 1, Nordis will be handling all elements of Steel City business in Eastern Canada which includes; importing, warehousing, distribution and warranty of the product line.

Nordis Distribution is a new subsidiary of NORMAND who has been distributing industrial machinery, tools and supplies to the woodworking industry for over 60 years. “Nordis will be dedicated to woodworking dealers only and it will operate out of a state of the art warehousing and distribution center just outside of Quebec City.” states Andre Normand (left), President of Normand Group. According to David Campagna (right), Business Development Manager for Nordis, “This centrally located facility will be a strategic hub in servicing Ontario, Quebec and all Atlantic provinces with Steel City’s innovative machines.” “Nordis has all the right synergies in place to help us get our products out to dealers and woodworkers much quicker and in a more efficient manner.” says Lucas Chang (center), President of Steel City Tool Works LLC, “We really believe this partnership will help us grow our brand awareness and market share in the very competitive Eastern Canadian market place.” Both parties are excited about their new partnership and the launch of the new Steel City line of Contractor and Cabinet saws. These will be available in many different offerings such as; granite or cast iron table in 1.75HP and 3HP versions. New models will be available for the fall selling season.

To find out more about Steel City’s full line of woodworking machinery and accessories, visit their website at www.steelcitytoolworks.com or call 1-877-728-6651 for a dealer near you. 

RSR Distribution Inc. Introduces New Peugeot Hand Tools Line To Canada.

In 1812 the two eldest Peugeot sons had the family mill converted into a steel foundry, thus opening the first page in the Peugeot tools history book as a saw manufacturing start-up. The enterprise ushered in a new era that saw a wide range of tools manufactured under the Peugeot family name.

Wood chisels, hammers and other tools were the making of its reputation for over 170 years right up to 1989, when production ceased. Late in 2005, the Peugeot brand made its comeback to the hand tools market offering a full range of progressive denture saws, wood chisels with tri-mat handle, full range of wood carving and wood turning tools, aluminum handle hammers and full aluminum levels.

Peugeot now offers a new line of hand tools using new technology and innovations. Every tool is design for the maximum performance, the comfort of the user and safety.


RSR Dist. is currently seeking dealers for these new Peugeot products.
If you are interested, please contact Stephane Roy at:
info@rsrdistribution.ca    or call 514-909-6333

New Square-top Blades from Forrest

Forrest Manufacturing’s two Square-Top Woodworker II blades deliver absolute 90º bottom cuts without scoring.

They are ideal for producing clean, scratch-free square cut box and finger joints. Like other Forrest blades, they come with a 30-day, money-back guarantee.

When asked how the two blades compare to competitive products, Mr. Forrest said, “Other brands grind a square top. But our blades cut a square bottom. The reduced resistance makes Forrest blades less likely to produce splintering and tear-outs. Quality-minded woodworkers recognize this as a big advantage.”

Forrest blades can be obtained direct from the factory, as well as from quality dealers, retailers, and catalogs. For more information about Forrest products or its factory-sharpening, call 1-800-733-7111 or visit www.ForrestBlades.com

Rosewood Studio Moves to Perth, ON

Ron Barter is pleased to announce that Rosewood Studio has found a new home in the Perkin’s Building, 2 Wilson Street West, Perth Ontario (just west of Almonte on Highway 7).

Classes will be starting this month and Ron is now accepting registrations for those and future classes. Be sure to check out the complete list of courses on their website. Rosewood Studio can be reached on their toll free at 1-866-704-7778 or locally at 613-256-8900. Their website is: http://www.rosewoodstudio.com

Tormek Launches New Jig for Drill Bit Sharpening

The complex geometry of a drill bit point makes it very hard to free hand sharpen it correctly. This Fall Tormek will launch a new Drill Bit Sharpening Attachment DBS-22 which makes it possible to sharpen drill bits on your Tormek Water Cooled Sharpening System with the highest precision.

You create a 4-facet point which gives the ideal cutting performance. The optimal point- and clearance angle can be set according to each drilling requirement, which depends upon the drill size and material. You can completely restore worn drills as well as broken drills to a perfect shape. Unlike conventional drill bit sharpeners, Tormek sharpens with water cooling which is gentle on the steel. Overheating of the steel is usually not noticeable, but the consequences are that the drill will dull rapidly and may even break. By working with the laws of physics and cooling the edge continuously, the risk that the steel becomes overheated and loses its hardness or gets micro cracks is eliminated. With a 4-facet sharpening, the chisel edge gets a point instead of being almost flat as on many drills. A 4-facet point will not walk and the thrust force required is considerably reduced compared to a conventional cone point drill. It generates less heat and the life of the drill is therefore also prolonged.

The attachment can be set at any point angle between 90¡ and 150¡ and at four different clearance angles. This flexibility enables you to give the drill the geometry that works best for each drilling operation. You can for example minimize the burr, which occurs on the exit side of a drilled hole by increasing the point angle and decreasing the clearance angle. The drill holder as well as the guides are made with the highest precision to ensure that the lengths of the two cutting edges will be equal within close tolerances. This is an essential requirement so that the cutting edges will work equally and bore a round, straight hole, which is not larger than the drill diameter.

Copes with drills from 3 mm (1/8") to 22 mm (7/8") and fits all Tormek models. Recommended retail price $ 274.99.
For details of your nearest dealer log onto www.tormek.com or call 1 877 454 8665.

Canadian Woodworker Opens Two More Stores

Canadian Woodworker will soon have two more stores operating in two new cities.

Surrey BC will be opening November 1, 2010 and Regina SK will be opening on March 1, 2011.

Canadian Woodworker will now represent and service all of western Canada with 6 stores in four provinces.

The stores will range in size from Surrey (at 8200 sq/ft) to Regina (at 3000 sq/ft). The Grand Opening in Surrey will be the last weekend in November, and the Grand Opening in Regina will be the second weekend in March 2011.

For more info see: www.canadianwoodworker.com

New Clamp Level From Stanley

When even the slightest miscalculation can lead to costly mistakes, the pros count on the accuracy and durability of Stanley Levels.

The new Stanley FatMax® Xtreme™ Clamp Level is so reliable, it comes with a Lifetime Accuracy Warranty. It also combines all the most-wanted features of professional grade levels with an innovative built-in clamp system for hands-free operation.

This practical new clamp system accommodates both 2 and 4 dimensional lumber (1-1/2 inch, 3-1/2inch) and securely holds the level to studs – whether horizontal or vertical – freeing up both hands to work. Stanley FatMax® Xtreme™ Clamp Levels have a Max Edge™ bridged center vial (patent pending) that allows for a continuous marking edge as well as an open line-of-sight to the center vial for reliable measurement. Stanley FatMax® Xtreme™ Clamp Levels come in 24-inch or 28-inch lengths and have a new body design that’s conveniently equal to stud width at 1.5-inch wide. The innovative new clamp system is built into the ends of the Levels where there’s the additional benefit of absorbent end caps that provide extra protection to the high-wear areas of the level.

Whether for use at home or at the jobsite, when strength, performance, and durability are needed, Canadians trust Stanley to have the right tool for the job. Stanley FatMax® Xtreme™ Clamp Levels are available for a suggested retail price of .99 at hardware stores and home centers wherever STANLEY® products are sold. For more information, please visit http://www.stanleyhandtools.ca or call 1-800-263-6292.

Innovative Laser Distance Measuring Tools from Bosch

Bosch Measuring Tools, pioneers in the development of some of the world’s most compact and accurate laser range finding tools, will soon introduce two more additions to its award-winning lineup. Building on Bosch’s proven short- and medium-range platforms, the company is entering the long-range laser measuring category with two innovative laser distance measuring tools – the GLR500 and the GLR825.

Capable of quickly and accurately measuring in 11 different modes over extended distances (825’ for the GLR825, 500’ for the GLR500), Bosch’s new range finding tools are perfect for builders, architects, construction supervisors, building engineers, finish and trim carpenters, project estimators, inspectors, plumbers, electricians, appraisers and even police departments investigating accident and crime scenes. And, even over extended distances, both tools are accurate to within 1 millimeter (0.04inch). That means users of all types can measure with confidence in any application.Bosch’s GLR500 and GLR825 come complete with a soft belt-loop case, a hand strap and four AAA batteries. Optional accessories include Laser View-Enhancing Glasses (DLA001) and a Laser View-Enhancing Target (DLA002). The GLR500 and GLR825 is available through authorized Bosch distributors nationwide.

To find out more or to find a local dealer, users may visit www.boschtools.com or call 877-BOSCH-99.

New Crown Support From Bench Dog Tools

“Many hands make light work” is a suitable motto for the new Crown Support from Bench Dog Tools.

What used to require an assistant and a second ladder is now portable, permanent and unfailingly reliable.

Unlike similar products on the market, the Bench Dog Crown Support straddles the molding, leaving the installer free to slide the molding around and adjust it for the tightest joint possible. This eliminates the need for climbing down the ladder and adjusting the molding support device.

The soft support pads are fully adjustable to accommodate crown moldings from 11/2" to 8" wide. Once adjusted, the support assembly swivels and wedges against the wall and ceiling, providing a secure hold with no risk of marring. Built from top quality materials, and with entirely tool-free adjustments, this is a support that asks for little, and keeps on giving.

The Crown Support threads onto most standard painter’s poles, as well as the new 12' Telescoping Pole

(SKU #31337, .99), (also from Bench Dog Tools).A separate adaptor (SKU #33940, .99) is also available that allows the Crown Support to be used with the FastCap® 3rd Hand Extension, a support pole that many carpenters already own.

The Crown Support (SKU #36449) retails for .99

For more info: http://www.benchdog.com

New From Laguna: 37" Wide Belt Sander

Laguna Tools is proud to announce the 37" Pro Wide-Belt Sander.

The sander is designed for maximum production rates as well as fantastic finish quality and incorporates the key features of other, costlier machines. These features include a digital table height readout, variable feed speed, oscillating sanding action, graphite platen and fast belt change. The 37" Pro Wide-Belt Sander is a versatile powerhouse designed for premium results in a busy shop, incorporating the features of bigger machines into an affordable unit.

For more information and specifications, visit www.lagunatools.com

In the Aug/Sept'10 Issue:

Features:

• Build an Electric Guitar (Part I)
• Foot Stool
• Trim Routers
• Hand-Cut Mortise and Tenon

Also:

• Wood Finishing
• Template Routing
• Dowel Strength Test
• Segmented Turning Jig
• Mortise and Tenon Jig
• Harmonious Grain