DuraGRIT Woodworker's Set of Carbide Sanding Tools

DuraGRIT Woodworker's Set of Carbide Sanding Tools

EXCLUSIVE PRE-LAUNCH PROMOTION only for Canadian Woodworking Readers! - SAVE over $76! (Regular MSRP $274.86US - reduced to $198.59US. Offer expires Dec 31st, 2014)
 
DuraGRIT Carbide Tools, is launching a Woodworker’s Set of carbide sanding tools in January 2015. As an exclusive offer to Canadian Woodworking readers, pre-launch sets can be purchased at a $76 saving, using a special coupon code. Hurry, this CWW exclusive discount expires December 31st, 2014.
 
All the steel backed, carbide grit tools in this set work on hard woods, soft woods, fibreglass, carbon fibre, laminates, composites, ABS, PVC, rubber, leather and even ceramic wall tile. The super hard carbide grit works just like sandpaper but gives a consistent sanded finish from start to finish of the job, as the grit doesn’t degrade along the way. They last so long, they become a woodworker’s ‘best friend’ making the best of the sanding process, without the need to continually stop and change worn, torn sandpaper!

news_duragrit_Woodworking set
 
The special DuraGRIT Woodworker's Set of Carbide Sanding Tools includes:
 
Tools 1 & 2 - Two 5” carbide sanding discs, one in 60 grit and the other in 120 grit.
These extreme, long life carbide discs, last so much longer than ordinary, disposable sanding discs, that users often leave their favourite grit permanently mounted to a dedicated orbital sander, using the supplied heavy duty hook and loop upgrade kit that comes with each disc.
The 5” DuraGRIT sanding disc, also does double duty as a super long life, sander/shaper on 5” belt/disc, bench sanders.
These carbide discs are both 5 and 8 hole compliant.
 
Tools 3 & 4 - Two 5” 90º TruSanders - 80 and 150 grit
These remarkable long life hand sanding blocks are unique in that they enable users to ’true sand’ a rough sawn edge, 90º to the work surface, as well as round corners, bevel edges and of course, surface sand.  They are very accurate and last so long that they rapidly become the woodworker’s ‘workhorse’ in the sanding department, eliminating the need to constantly change worn sandpaper!
 
Tool 5 - A 1/4” Square carbide file in 60 & 120 grit combination.
This square file has 60 grit on two faces and 120 grit on the other two faces, enabling a user to ‘rough out a shape, rotate the file 180º and finish sand with the finer grit. Like all the tools in this set, this file will work on hard woods, soft woods, fibreglass, carbon fibre, laminates, composites and even ceramic wall tile, making it a very versatile and useful tool.
 
Tool 6 - A 60 grit 1/4” Round carbide file
The 1/4” round carbide file, is useful in all the usual ways traditional ‘round files’ are useful in. The difference is, this file, like the other carbide hand tools in this set, cut on both the forward and backward strokes, virtually cutting the sanding job in half!  Using this file on the edge of a ceramic wall tile to create and open up a hole for a water pipe, is impressive in that it does the job with minimal chipping of the tile, leaving a clean and accurate cut.
 
Tool 7 - A Thin, carbide Flat Sander in a 60/120 grit combination.
So many woodworkers appreciate this ‘jack of all trades’ versatile, flat file.  It is ridged, yet so thin (1/16”), it can sand in places no other sanders or files can.  Like the carbide Square File in this set, the 9” Flat Sander, is coated with a 60 and 120 grit combination, enabling the user to spin the tool around and ‘finish’ the rough-cut made with the other half of the file. Great for ‘easing’ sticking doors etc.
 
Canadian Woodworking readers only!  SAVE over $76!  (Regular MSRP $274.86US - reduced to $198.59US.  Offer expires Dec 31st, 2014)
 

Order Now