Early Winter 2016 Products From Lee Valley

Early Winter 2016 Products From Lee Valley

Early Winter 2016 Products From Lee Valley

Cast Scratch Stock
 
This elegant hand reeder and beading tool can be used to cut decorative profiles into furniture (such as beading on small table or cabinet edges or reeding on chair and table legs). It can also be used with a straight cutter for shallow rabbeting work, such as on mirror and picture frames.
 
LV_27K0610
SmartWedge Shims
Reliable and easy to use, these shims have been popular in European housing construction for over 40 years. Made from durable polyethylene plastic, they are immune to damp – unlike wood shims, they won’t swell, compress or decay.
 
 
LV_05p3006
Variable Angle Fence for Veritas® Rabbet Planes
 
Our variable angle fence is now available in a version that mounts on the fence rods of our skew rabbet and jack rabbet planes, locking in position with brass collets. It allows accurate and consistent planing of any angle from 45° to 135°, set using a square or angle gauge, or directly on an angle you wish to match.
 
 
LV_05J6501
Veritas® Plunge Base for Rotary Tools
With this base, you can convert almost any rotary tool (such as our Dremel® 3000 item #17J17.10) into a miniature plunge router for fine detail work, allowing precise depth control for hardware and inlay recesses, or even freehand relief carving. Low-slung grips and a 4" x 3" footprint make it easy to position on narrow surfaces and close to edges.



 
LV_86j0401
Mini Downcut Spiral Bits
 
These double-fluted spiral bits have a downward cutting action that shears cross-grain fibers cleanly and with no surface tear-out, ensuring crisp, sharply defined edges.
 

 
LV_86j0421
1/8" Shank Carbide-Tipped Router Bits
 
For adding fine detail to small-scale projects, these professional-quality bits can be used with the Veritas® plunge base for rotary tools (our item #05J65.01) as well as in a 1/4" plunge router or laminate trimmer fitted with a bushing adapter (available separately). 
Tuesday, January 12, 2016