Kreg Bench Clamp Base and the In-Line Clamp

Kreg Bench Clamp Base and the In-Line Clamp

Kreg Bench Clamp Base

Kreg is proud to introduce great new options that make clamping more convenient than ever: the Bench Clamp Base and the In-Line Clamp.  

You can never have too many clamps, but you don’t just need more. You need clamps that offer versatility and convenience in a variety of applications. The latest Kreg Clamping Solutions, offer these things, and more 
 
The Bench Clamp Base (lead photo above) makes it easy to create a versatile clamping station almost anywhere. The Bench Clamp Base is a perfect companion to the Kreg Mobile Project Center, and it allows you to get more from any work surface that’s equipped with 3/4" (19mm) or 20mm bench dog holes. Or, you can simply drill a hole in any work surface, and easily attach the Bench Clamp Base, and just as easily remove it when not in use, or move it to another location. 

The Kreg Bench Clamp Base allows you to use a Kreg Bench Clamp on almost any work surface. Tool-free installation allows you to set up the Bench Clamp Base in seconds. Just slip the anchor bolt through the hole, and then tighten the locking knob. Slide a Kreg Bench Clamp into the Base, and you’re all set. And, you can move or store away the Bench Clamp Base just as quickly, so it’s there when you need it and out of the way when you don’t. 
 
The Bench Clamp Base will be available beginning in November 2017, and will be available individually, or paired with a Kreg 3" Bench Clamp. The Bench Clamp Base (Item# KBCBA) has a suggested retail price of $19.99. The Bench Clamp with Bench Clamp Base (Item# KBC3-BAS) has a suggested retail price of $49.99. 

The Kreg In-Line Clamp holds workpieces and assemblies in place without getting in the way. By applying pressure from the side, rather than from overhead, the In-Line Clamp stays out of the way as you work. A peg that fits into any 3/4" (19mm) diameter hole holds the clamp in place, so the In-Line Clamp makes it possible to get more from any bench with 3/4"  or 20mm dog holes—or any work surface where you can drill holes. The In-Line Clamp also makes a perfect companion to the Kreg Mobile Project Center. 
 
The In-Line Clamp (Item# KBCIC) will be available beginning in November 2017 with a suggested retail price of $19.99. The Bench Clamp with Bench Clamp Base has a suggested retail price of $49.99. 

KregTool.com
 
Monday, October 2, 2017