M.POWER Diamond Cross Sharpening and Honing Stones

M.POWER Diamond Cross Sharpening and Honing Stones

M.POWER Diamond Cross Sharpening and Honing Stones

M.POWER is pleased to announce it's new line of "Diamond Cross" diamond sharpening and honing stones.
 
 
Diamond-Cross-bench-stone
8” BENCH STONE – GPS  DOUBLE SIDED + HOLDERS
 
The Diamond Cross 8” Benchstone lies at the heart of M.POWER’s new comprehensive range of diamond sharpening stones. Using only the finest materials available the 8” Benchstone is a unique laminated hybrid. Combining the advantages of Stainless steel and 01 Tool Steel.
 
Diamond-Cross-Router-Bit-Cutter-Sharpener
ROUTER BIT SHARPENER  DOUBLE SIDED WITH HANDLE
 
We think this may become a classic “go to” diamond stone. The Diamond Cross Router Bit Sharpener was created directly from Proto-type tester’s feedback. The design brief created from them was to reduce the stones width and have the handle closer to the point of contact with either router bit edge or as we also discovered - TCT saw blades. A 2nd series of tests were carried out confirming that the new design all but removes the leverage feed back to the handle from the blade edge. We think you’re going to like the result.
 
Diamond-Cross-Credit-Card-Diamond-Stone
CREDIT CARD STONE – GPS  DOUBLE SIDED + HANDLE
 
The Credit Card diamond stone is a handy little sharpener, successfully used for years by woodworkers, crafters through to other groups such as fishermen and gardeners. The size is perfect however the Diamond Cross Credit Card has some great improvements, and it’s the first Credit Card diamond stone to incorporate a handle.
 
Diamond-Cross-Sharpening-5inch-File
5 X 1” SINGLE HANDLE FILE  GPS - DOUBLE SIDED
 
Unlike the folding variety of small diamond files from other manufacturers, the Diamond Cross 5” File is a sturdier “General Purpose” file. As with the rest of the Diamond Cross file range, they have a single solid piece of 1/16th Stainless Steel at their core which runs right through under the handle providing a comfortably robust feeling. The DC 5” File can be used for sharpening any number of different tools found in the kitchen, workshop or garden shed.
 
 
Diamond-Cross-Twin-Handle-File
4X1” TWIN HANDLE FILE  IMPROVES CONTROL
 
The fundamental issue when sharpening larger blades E.g. shears or mower blades is maintaining a consistent contact at the correct angle along the entire length of the blade. Inspired by the traditional spoke shave, the Diamond Cross Twin Handle File has been developed to enable the user to employ both hands when sharpening.
 
Diamond-Cross-Diamond-Stone-Holder
DIAMOND STONE HOLDER
 
 
M.POWER’s Diamond Cross Diamond Stone Holder has a good number of advantages over it’s predecessors. To start, it can hold a large range of different diamond stone shapes and sizes and not just our new Diamond Cross range either. From a solid 8” bench stone to any old Credit Card diamond stone. The DSH’s rare earth magnets lock onto the underside of the stone providing instant grip between bench/work-surface and Diamond stone. OK so there is a piece of non slip mat that can do that. Except that the DC DSH (unlike the spongy mat) provides much needed clearance. So when you’re sharpening a knife, the DSH raises the sharpening surface so that the knife handle doesn’t hit the surface that you're working on.

Available From WoodPeck.com

Watch a Video
 
Monday, January 11, 2016