Fancy Business Card Cases - Canadian Woodworking Magazine

Weekend Project: Make these fancy card-holders – by the dozen – and you’ll become a favourite woodworker among your family and friends.


Fancy Business Card Cases

Photos by Charles Mak

First impressions are impor­tant, and business cards are often exchanged during a first business encounter. Impress your contacts with a stylish card case you made, and customized, yourself. I’ve made and given these pocket-size card cases to fresh graduates and friends, knowing that theirs will stand out from their peers’ store-bought leather or aluminum holders. Your project could change or influence someone’s career.
Create a pattern for the case cover that can be a monogram for a personalized effect. You can find countless designs or ideas from pattern books or the Internet.
Gather your wood
The laminated card case consists of the top, the middle strips and the bottom. For one case, you’ll need two pieces of hardwood 1/8" t. x 2 3/8" w. x 3 3/4" l. and a hardwood in contrasting color, 1/8" x 2 3/8" x 3 3/4" for the middle section. These are suggested dimensions and you can vary them slightly.
Make the cover and bottom
First, stack the top and bottom pieces and secure the stack using two strips of double-sided tape. Mark a 3/8" radius half-circle centered on one end and use the 3/4" diameter Forstner bit to drill the half-circle opening. Remove and put the bottom piece aside.

Stack and Drill – Drilling the finger notch on the two pieces at the same time ensures consistency.

Cut the Pattern – Mak cuts on the line and then uses needle files to remove the saw marks.
Using temporary-bond spray adhe­sive, attach the desired pattern on the top piece. If you’re making multiple cases with the same design, stack them together with double-sided tape. Drill a blade entry hole through the stack to install the blade and cut out the pattern with a scroll saw or coping saw. Use a fine file to remove any saw marks on the inside edge and fine-tune the cut.
Make the middle piece
Lay out the U-shapes pattern on the middle work piece and cut out the U-shaped strip (or, in a stack when made in multiples). The resulting piece will have very weak short-grain on the end, so be careful handling it. Alternatively, you can make three narrow strips that can be sandwiched between the top and bot­tom pieces, but aligning them is a bit tricky. Once you do a couple of cases, you will find the task does get easier.

Mix and Match – The short grain joining the two longer sides of the middle section together is weak, so handle the part carefully. Here are two maple and three walnut middle sections ready for assembly.
Assemble the case
To align the pieces for assembly, I formed an L-shaped assembly jig by clamping two boards perpendicular to each other on the workbench. Place the bottom piece inside the jig and CA glue the middle strip to the bottom, ensur­ing the edges are aligned. Then apply glue to the strip and clamp the cover to it, again ensuring the edges are aligned.

Make an Alignment Jig – Clamp two straight edges to form an L-shaped platform for the assembly process.

Clamp the Case – Using CA glue will speed up the process, but other glues will work fine.
To create a softer, more finished look, sand all edges using a bench-top sander or by hand, then add a small chamfer to the edges. Finish-sand the entire project. Don’t forget to sign your project; my favorite way of signing this kind of project is with punch stamps bearing my monogram and the maple leaf symbol. Remove all sanding dust before applying your finish of choice. For the project shown, Old English lemon oil was applied to the wood.

Chamfer the Edges – Bevels can be added by hand or on a sander. They help the finished case feel nice in your hand.
Deciding what pattern to use, what woods to mix and how many to make is relatively easy. Who gets to receive your first handcrafted card case could be the hard decision. 

Charles Mak

Charles handed out many business cards during his career. Now semi-retired, he enjoys making and handing out cases more than cards.

Related Articles

Part II - Business Basics

Hobby To Business: Before you can hang out your shingle, you will need to decide on the form of legal entity that you want your business to be.

Seventy-Six Years in Business, Hundreds of Machines

Shop News

Pocket Business Card Holder

Craft Project: If you sell the woodworking products that you make, it’s a good idea to always carry your business cards with you. After all, you never know when you will meet someone who could be a potential client. And, what better...