Plumb Bob - Canadian Woodworking Magazine

Wood Turning: Although there are many different styles of plumb bobs, they all, in essence, do the same thing: they enable you to establish a vertical line. Plumb bobs are one of the earliest tools know to man.


Plumb Bob

The Egyptians made use of them building the pyramids, and the essential design of the bob has remained unchanged since about 1500 BC.

You can use a solid block of wood from a single species (any hardwood will do nicely) or you can glue up a lamination of several species, as I did. I used a piece of acrylic for the toe. The acrylic is glued on with a tenon for added strength. This way there is more surface being glued than just butt gluing the toe onto the wood body. Most bobs follow basically the same shape, although you can alter that slightly.

• Size a tenon on the acrylic toe using a skew chisel and a pair of calipers. You also need to turn a tenon on the top knob and then drill holes for the tenons on the body.

• Glue the three parts of the bob together.

• Shape the bob. Remember to always turn from large diameter to small - this avoids a nasty catch.

• You can add different decorative features such as a cove or bead. I chose to turn a small bead on the acrylic  

TIP: Beads can be cut with almost any tool, but the skew is the best at cutting beads cleanly. If you cut the bead properly, no sanding will be required.

• Turn a tenon using a ⅜" parting tool so that the piece can be held with a chuck. Keep the tailstock in place for additional support.

• To shape the smaller parts I used a 3 ⅜" spindle gouge, which can also be used to roll a bead.

• Remove the tailstock to finish the toe end of the bob with the toe of the skew. This cut requires absolutely no finishing.

• Flip the bob in the chuck and finish the top end of the bob with the skew.

• Drill the hole for the brass eyelet.

Besides making a functional measuring instrument, this project is a great practice exercise in tool work.

plumbbob_1 copy
Size tenon on acrylic toe
plumbbob_2 copy
Project parts ready to assemble
plumbbob_3 copy
Turn bead on toe
plumbbob_4 copy
Turn tenon on top
plumbbob_5 copy
Finish toe with skew chisel
plumbbob_6 copy
Finish top with skew chisel
plumbbob_7 copy
Drill hole for brass eyelet 
plumbbob_8 copy
Finished product


Paul Ross
(613) 393-1795