Freud 8 Piece CNC Router Bit Signmaking Set | Canadian Woodworking & Home Improvement

If you're getting into CNC woodworking a dedicated CNC router bit set (#87-108) is both economical and very handy to have around.

Freud 8 Piece CNC Router Bit Signmaking Set

Freud 8 Piece CNC Router Bit Signmaking Set



If you're getting into CNC woodworking a dedicated CNC router bit set (#87-108) is both economical and very handy to have around. Signs of all types can be made with this one carbide tipped set form Freud. The set includes 60 degree and 90 degree V-groove bits, tapered bits for deep grooves, up and down spiral bits for clean cuts and ball nose bits for relief routing. This combination of bits will allow for a wide variety of cuts in wood, plastics, composites and more. Visit FreudTools.com for more information.

Related Articles

Flush Trim Router Jig

Shop Jig: When working with sheet stock, thick solid wood edge banding will give you greater design flexibility than thin commercially available iron-on veneer tape. Use this jig and your router to trim edge banding flush with the...

Milescraft Offset Router Base

Shop Tested

Rikon’s 4-Piece Woodturning System

Shop News: Developed for the experienced or novice wood turner, RIKON’s turning system features tungsten carbide cutters that keep their sharp cutting edges longer than typical carbon or high speed steel tools.