Rockler Box Joint Jig - Canadian Woodworking Magazine

productnews_1

Rockler Box Joint Jig



The Rockler box joint jig lets woodworkers cut notch after notch continuously with almost no measuring, minimal set-up and incredible precision — all with a standard router bit and table.

Capable of producing ¼", ⅜" and ½" wide joints —the jig secures to any router table with a standard ¾" mitre slot. From there, set-up simply requires attaching the desired bit and indexing key (the jig includes three keys; one for each joint width), fastening a sacrificial face to the pre-drilled backer sled and adjusting the jig into po­sition. The Rockler Box Joint Jig works with stock up to ¾" thick and for best results, Rockler recommends using spiral up-cut router bits, sold separately. The jig retails for US$79.99 and is available at rockler.com or call 1-877-ROCKLER.

Related Articles

Grizzly 8" Jointer

Shop News: You'll be hard-pressed to find another 8" jointer offering so much for so little

Scorpion 12” and 16” Combination Jointer / Planers

Shop News: The Scorpion 12” and 16” combination jointer/planers are built by CWI Woodworking Technologies to be best in class machinery with the features, performance and quality serious woodworkers are looking for.

New Hammer A3-26 Jointer/Planer Introduced in Canada

Product News