Sharpening Stones - Canadian Woodworking Magazine

Know Your Tools: Hand tools are not only a pain to use, but dangerous, when they're not sharp. Sharpening stones will help keep your hand tool edges ready for action.

Sharpening Stones

Sharpening Stones

Photos by Rob Brown; Illustration by Len Churchill

Generally speaking, if a hand tool isn't working well for you the first thing to consider is the sharpness of its cutting edge. A sharpening stone is used after a grinding wheel and will remove small amounts of steel from both the bevel and the back of a blade, causing those two edges to meet at a very fine point. This results in a sharp cutting edge that will easily slice through wood cleanly and with little effort.
Some stones are double-sided, offering a different grit level on opposing sides. These stones can offer good value when purchasing your sharpening equipment. In the west, sharpening stones traditionally used oil to lubricate them. Today, more and more stones use water. Though there are slight differences between oil stones and water stones, both types will allow you to obtain a sharp edge. Many sharpening stones are quarried from natural stone, while some are produced from man-made materials. Some water stones require you to submerge them in water for up to 30 minutes prior to using, in order to saturate the stone with water so it will be properly lubricated. There are many powered sharpening systems on the market that will assist with getting a sharp edge with minimal effort.
Many new woodworkers start with a basic full-sized two-sided stone (in grits about 1000 and 4000), and then add other full-sized flat stones to round out their collection. Flat and curved slip stones will also help you sharpen other tools like carving gouges and router bits. Like sanding wood, sharpening a blade requires the user to start with a rougher grit and move toward a finer grit. Lapping films, diamond pastes, strops and other abrasives can also be used to further sharpen a cutting edge.
Price Range (full-sized stones): $40 - $200
Dimensions (full-sized stones): About 3" wide x 8" long x 1" thick
Types of Cutting MaterialsCutters: Ceramic, Diamond, Aluminum Oxide



Get the Most Out of Your Sharpening Stones

Practice Makes Perfect
At first sharpening can be frustrating, but with practice you'll find a sharp edge can be obtained with little fuss. Stick with it because a sharp edge is crucial when using hand tools.
Don't Drop It
Many sharpening stones will break if dropped, rendering them useless for most tasks.

Get Set Up
Sharpening can be wet and messy. Create a small area that will protect against water or oil so you can focus on the task of obtaining a sharp edge.
Keep it Flat
An older stone that has been dished out due to frequent usage will not provide you with good results. Use another stone, or an abrasive on a flat surface, to flatten a dished stone face.
Consider a Jig
A honing jig will allow you to accurately sharpen most cutting edges to precise angles. They also go a long way to keeping you from digging into the stone with the cutting edge while sharpening.

Related Articles

Make Sharpening Easier with Diamond Stones

Shop Skills: Sharp tools make woodworking easier. One of the easiest and quickest ways to do the job is with diamond stones.

The Tormek Way of Sharpening

Shop News

Veritas Sharpening System

Canadian Tool