Top 10 Easy Gift Projects - Canadian Woodwokring Magazine

Top Ten: Easy build projects that make great gifts.

Oriental Display Stand

Top 10 Easy Gift Projects

All of these projects can be made over a weekend or a week of evenings. For those who like to build from plans, we’ve included many projects from previous issues. If you’re really pressed for time, make sure to select finishes that dry fast. Shellac, water-based finishes and acrylic paint are good choices.
1. Chopsticks – Once you get in the ‘zone’ you could make dozens of these from small scraps of leftover wood. The sticks can be round, square, or rectangular. Using exotic wood will really make them stand out. Chopsticks (Dec/Jan 2010).

2. Play Blocks – Not all the blocks have to be square or rectangular, as long as they’re large enough not to be swallowed. You can create surface texture and decorative details with a table saw, router, rotary tool, rasps, chisels, and other hand tools. Sand all the corners and stick to foodsafe, non-toxic finishes, or better yet, leave the blocks unfinished. Children’s Blocks (Dec/Jan 2012).

3. Oriental-Style Display Stand – This stand is a great way to show off just about any cherished gift. It’s easy to make and requires only simple cuts with a table saw or handsaw. The plan calls for the top slats to be doweled to the feet, but you could also screw or glue them in place. Oriental Style Display Stand (Oct/Nov 2008).
4. Cutting Board – Family or friends who love cooking will appreciate a custom-made, food-safe cutting board. Choose a dense, close grained wood like maple, cherry, or purpleheart. Don’t be confined to a square or rectangular shape – concave and convex curves, or even a harmonic curve, easily cut on the bandsaw, will add a lot of pizzazz to the board. Use a waterproof glue, and finish it with lightweight mineral oil. Super Simple End Grain Cutting Board (Dec/Jan 2020); Inlaid Cutting Board (Dec/Jan 2010)
5. Toy Train – This toy is bound to fascinate any youngster. You can make all the parts, or purchase the wheels and other locomotive gear – headlight, whistle and smokestack – from a craft supplier. Toy Train (Dec/Jan 2008); Kid's Train Set (Dec/Jan 2018); Train Set (Feb/Mar 2009)

6. Keepsake Box – Just about everyone has their own little ‘treasures’, knick-knacks that we like to hang onto. You’ll find lot of ideas in last month’s issue of our magazine. Keepsake Box (Oct/Nov 2009), Lily Pad Box (dec/Jan 2015).
7. Smart Device Stand – What tech aficionado wouldn’t love a one-of-a-kind stand for their smartphone or tablet computer? You’ll need a single piece of wood – think lustrous exotic wood – the width of the smart device, and about six inches long. Cut a groove, at about a 25° angle, slightly wider than the width of the device and about 5/8" deep. Tablet Stand (Dec/Jan 2016)
8. Tool Caddy – A length of dowel, five short boards, and a handful of screws or nails is all it takes. The fun part is in the variation: substitute a bamboo pole or neat looking tree branch for the handle; chip carve the top edge of the long side boards; or stencil the recipient’s name on the side. They make great gifts for gardeners and painters alike. Build a Kid’s Toolbox (Oct/Nov 2012).
9. Bird House – Bird houses are fun to make, and it’s a great way to attract and keep birds in your back or front yard. You can use almost any wood, even plywood. While you can apply an exterior finish, don’t put a finish on the inside of the box. You can use any shape that comes to mind, but the crucial part is the overall size and access hole size. For a list of dimensions for common Canadian birds, visit Housing for the birds (Apr/May 2007).
10. Bookmark – The easiest way to make a bookmark is to cut a 1/16" or so slice from a 1" thick (2" wide or larger) board about 6" long. Hand plane the edge of the board before each cut so you’ll only have one side of the bookmark to scrape or sand smooth (don’t run the piece over the jointer as it’s much too short). You can then chip carve, paint, or stain the bookmarks.


Related Articles

Skid and Pallet Projects

Recycled Wood 

Woodchuckle: Projects from Hell

Woodchuckle: In most businesses and endeavors, there always comes a time you will refer to as, "the _____ from hell."

Design Your Own Projects With CAD

Software Review:  Why design your own projects? Using plans is OK, but what about something you can’t find a plan for? Or what if you have a unique need that no one has designed a project for? Designing your own projects solves these...