Undermount Drilling Guide for Drawer Slide Installation

Undermount Drilling Guide for Drawer Slide Installation

Undermount Drilling Guide for Drawer Slide Installation

Undermount Drilling Guide Adds to Rockler's Industry-Leading Line of Drawer Slide Solutions
 
Medina, MN – Rockler Woodworking and Hardware has introduced an installation solution for Blum Tandem undermount drawer slides – the JIG IT Undermount Drilling Guide.
 
The JIG IT Undermount Drilling Guide turns a difficult installation into a quick, easy and repeatable process. To install Blum Tandem drawer slides, the underside of each drawer box must be drilled with six precisely-aligned holes. The jig template provides a reliable guide for drilling all six holes when placed in the positions provided on the included instructions. The result is a drawer box that clicks into place on the slides perfectly every time.
 
"Installing undermount slides used to be tricky, even frustrating," said Steve Krohmer, Rockler's vice president of merchandising and proprietary. "The JIG IT Undermount Drilling Guide ensures that both the positioning and the angle of every hole you drill will be ideal for accurate, repeatable slide installation."
 
The JIG IT Undermount Drilling Guide is uniquely shaped to leverage the edges of the underside of the drawer box for perfect positioning. Included with each jig are two 2.5mm brad point drill bits, a 6mm brad point drill bit, two stop collars, an allen wrench and a complete set of installation instructions. To install the Blum Tandem drawer slides inside the cabinet, Rockler offers the Undermount Drawer Slide Installation Jig (57268, sold separately).
 
The Rockler JIG IT Undermount Drilling Guide (50713) is priced at $42.50 CDN.

Rockler.com
 
Tuesday, February 16, 2016