Who Wants Some Filters?

Who Wants Some Filters?

Who Wants Some Filters?

Giveaway! Who wants some Filters? 
 
Clean Filters = Good Performance!
How and when should I clean my turbine filter?
 
A couple of years ago we posted this particular question in a blog.  There is no quick answer but a thorough cleaning of your system should be done periodically. Clean Filters = Good Performance!
 
It’s easy to add this step to your system cleaning routine. After you have completed your spray gun cleaning, check on your turbine filters and see if they need a good wash! It only takes a few minutes and in the end it will ensure that your turbine lasts you a long time.
 
Clean Filters are a Must!
Dirty filters could inhibit your spray performance and quality. Clean filters are critical to good performance and turbine durability.
 
Checking your turbine filters periodically to see if they need to be cleaned or replaced is an essential part to your maintenance routine.
 
Fuji Spray turbine units are built with a durable metal powder coated case that needs virtually no maintenance. However, dirty filters will reduce the power blown through the motor and over time this may cause the turbine to overheat reducing the life of the motor.
 
Cleaning your filters…
  • First and foremost, always unplug your Fuji Spray turbine system when cleaning.
  • Use pressurized air to blow out the excess dust and dirt found within them.
  • Soak the filters in warm water for a few minutes, and then rinse them out in clean water.
  • Before placing the filters back into the turbine case, please ensure that they are completely dry.
Fuji Tip…Always have a spare set of extra filters on hand. This will eliminate having to wait for your filters to dry before completing or starting a new project.
 
Time for new filters!

fuji-dirty-filters
If you can’t clean them any longer and the dust and dirt can’t be removed, it’s time to retire the filters and replace them with new ones.
 
Remember that good performance is connected to a well maintained system. So don’t neglect the filters, it won’t allow your turbine to breath properly or live longer.
 
Thank you!
Tis’ the Season of Giving! In appreciation of your loyalty, Fuji Spray will be giving away free filters (while quantities last) to our newsletter readers.
  • Subject Line: 2016Filters
  • Full name
  • Address
  • Phone Number
  • Turbine system (ex. Mini-Mite 3 or Mini-Mite 3 PLATINUM, Q4 Gold or Q4 PLATINUM, etc.)
  • Filter part # (see below)
Which Filters Do You Use?

fuji_filters
In 2016 The PLATINUM Series were introduced, changing the look and the type of filters used in The Mini-Mite Models.
 
#4009-2 DIY-PRO Series and previous models Mini-Mite Turbine Filters – SQUARE SHAPED
  
#7224-2 Filters for Mini-Mite PLATINUM™ ONLY – HAND SHAPED 
     
#5029 Q-Turbine Filters (GOLD & PLATINUM)
 
NOTE: Only one per customer and while quantities last. Offer valid until December 30, 2016. Please use “2016filter” in the subject line. Allow 2-3 weeks for delivery.
 
Fuji Spray Head Office & Warehouse will be closed for the Holidays from December 23rd, 2016 to January 2nd, 2017. All entries received during this time will be reviewed upon our return in January 2017.
 
Your Turn!
What are some of your tips on keeping your Fuji turbine in tip top shape…?
Share your thoughts and questions!

FujiSpray.com
 
 
Tuesday, December 20, 2016